Windows 10 IOT Remote Display Experience

With Microsoft Build 2016 complete, there are so many things to be looking at and trying out.   One of the more useful features for me right now is the new remoting functionality in Windows 10 IoT Insider Preview 10.0.14295.   I have this running on a Raspberry Pi 3 and I am busy with some work using an array of sensor telemetry.  Being able to see what is happening remotely make life far easier when building Universal Apps.

To configure this is very simple.    There is a new menu option added to the administration console called “Remote”.  This is accessible via the URL:  http://[ipaddress of pi]:8080.   If you haven’t changed the password the login should be:  “Administrator” and “p@ssw0rd”

IoT Remoting

Enable the Windows IoT Remote Server by ticking the box presented.

 

To access the Raspberry Pi remotely you need a client.   This is available in the Windows Store either by following the provided link, or just by searching for “Windows IoT” in the store.  https://www.microsoft.com/store/apps/9nblggh5mnxz

 

remote client

 

This will run on any Windows 10 device.   Just something to note: on a Windows 10 Mobile device (Lumia 950 XL in my case) you may have to set the device color scheme to light for the application text to be legible.  I’m sure this will be corrected in later builds.

iot client

Fill in the IP address of the Raspberry PI in the “Enter an IP address” text box and click / tap “Connect”.  You should now be seeing what the Raspberry Pi is displaying.

WP_20160403_16_42_25_Pro_LI
Remoting to a Windows 10 PC / Tablet
WIN_20160403_17_10_17_Pro
Remoting to a Lumia 950 XL

 

Build 2015: Windows 10 IoT Preview on a Raspberry Pi 2

Day 1 of Build 2015 has been great!   The IoT inclusions especially have been very exciting for me.

 

We now have Windows 10 IoT core released and running on:

Raspberry Pi 2
MinnowBoard Max
Galileo

 

Also very interesting and exciting news is, we have Arduino support from Microsoft.

Windows Remote Arduino
Windows Virtual Shields for Arduino

 

Let’s start by installing Windows 10 IoT Core Preview on a Raspberry PI 2. I know many of you that bought a PI just to do this, I know I did. 🙂

 

Start by downloading the “Windows_IoT_Core_RPI2_BUILD” from https://connect.microsoft.com/windowsembeddedIoT/Downloads.  I had to accept some EULAs and click around before anything appeared to be selected for download.  It could have also been a timing problem as I was a bit eager to download and perhaps it was not available that soon.

 

The requirement for the installation is a Windows 10 Build 10069 or higher PC to copy the Windows 10 IoT installation onto an SD card . I downloaded the new Windows 10 Build 10074 ISO that was released today from http://windows.microsoft.com/en-us/windows/preview-iso-update-1504.

 

Install Windows 10. I ignored the recommendations and installed on a Virtual Machine (on VMWare) and not a physical PC.  VMWare  passes through the SD card without problems to Windows 10.

 

Once everything is installed, copy the “Flash.ffu” file from the downloaded “Windows_IoT_Core_RPI2_BUILD” zip file to a folder on the Windows 10 PC.

 

From an Administrator Command line run the following command:

 

diskpart
list disk
exit

 

Note the number of the disk associated with the SDCard.

 

Run the dism command replacing the N in “\PhysicalDriveN” to the number noted above.

 

dism.exe /Apply-Image /ImageFile:flash.ffu /ApplyDrive:\\.\PhysicalDriveN /SkipPlatformCheck

After a short wait, you should see: “Operation completed successfully”. Eject the SD card.

 

success

Insert the SD card into the SD card slot in the Raspberry PI 2. Plug the HDMI cable into the PI and of course the monitor. Plug the power cable into the Raspberry PI. After a few worrying minutes Windows 10 IoT should be all booted up. It will reboot once during the initial setup process and the interesting blocks displayed in-between the Windows Logo appearing and final boot-up seems normal.

 

Next step is to make it do something useful! 🙂

 

rasp pi 2 rasp pi 1

For full detail instructions you can follow this link: http://ms-iot.github.io/content/win10/SetupRPI.htm